DV4Mini

In the DV4mini control panel software, click on the “Expert Settings” tab and under “Choose nearest DMR Master:” select Phoenix-F.

dv4mini

From the DVControl tab you can then select “DV4mini Settings” DMR+, and from the TS2 Reflector list select “4404” for access to TG840.

dv4mini2

SharkRF OpenSpot

Log into the web interface and select the “Connectors” tab. Select DMR+. From the Server list, select “Phoenix-F”. More details can be found here.

sharkrf

DVMega

Currently only connection to our network via the MMDVMHost application is possible. When setting up the MMDVMHost software you will need to edit the MMDVM.ini file to point to our Master server. Under the section “[DMR Network]” set the following settings.

[DMR Network]
Enable=1
Address=78.129.218.25
Port=55555
Jitter=300
# Local=3350
Password=PASSWORD
# Options=
RSSI=0
Slot1=0
Slot2=1
Debug=0

If you would like the DVmega to automatically connect to reflector 4404 for use on TG840 remove the “#” before “Options=” and change the line to say.

Options=StartRef=4404;RelinkTime=60;UserLink=1

StartRef = Initial Reflector

RelinkTime = If you change reflector this is the timeout before it switches back to 4404

UserLink = Whether reflectors can be changed via private calls from a radio.